venerdì 6 marzo 2015

Glenn Hauser logs March 5-6, 2015


** BANGLADESH. 15505, March 6 at 1357, BB open carrier, poor with flutter; IS begins at 1359:05.5, mistimesignal ends at 1359:24.5, theme and opening Urdu (Glenn Hauser, OK, DX LISTENING DIGEST)

** BOTSWANA. 15580, March 6 at 1458, overmodulated and distorted music on fair signal, presumably VOA Music Mix, 1500 VOA theme and news less distorted (Glenn Hauser, OK, DX LISTENING DIGEST)

** BRAZIL. 4885, March 6 at 0609, lively Brazilian music vs CODAR swooshes, so R. Clube do Pará, Belém, is back to 24-hour service after missing a week or so; at 0710 some ads mentioning Pará. The other 4885 ZY, in Rio Branco, is listed in WRTH as 09-04 UT (Glenn Hauser, OK, DX LISTENING DIGEST)

** BRAZIL. 11745 & 11815, March 5 at 2323, crackling spurs from 11780.1v RNA/RNB are already barely audible, surely to build up along with the fundamental as the night progresses (Glenn Hauser, OK, DX LISTENING DIGEST)

** CHINA [and non]. 9875, March 5 at 2315, Chinese talk, CNR1 jamming // 9825 mixing with Firedragon and something else: i.e., RFA Tibetan via LITHUANIA during this hour only. 9825 is vs RFA Mandarin via Tinian this hour only.

11945, March 6 at 1504, CNR1 jammers with echo, good with flutter and CCI, which is victim RFA Mandarin via TAJIKISTAN during this bihour only (Glenn Hauser, OK, DX LISTENING DIGEST)

** CHINA. 9870, March 6 at 1352, CRI English, fair with flutter, and ahead of // Cuba 9570. Not a trace of AIR VBS from Bengaluru supposed to be here at 1230-1740. CRI listed as Xi`an site at 1300-1557 (and BTW another collision on 9870 is Iran in Arabic from 1430). Why won`t these stations/nations get their acts together, or rather, apart?

9585, March 6 at 1355, CRI English is gone from here after unexplained appearance yesterday, reaudiblizing Iran in Japanese, very poor (Glenn Hauser, OK, DX LISTENING DIGEST)

** CUBA. 9845-9855 at least, March 6 at 1351, huge dirty noise blob as this RHC transmitter is totally out of order. By tuning precisely to center 9850 one can make out some program modulation // 11760 and all the other frequencies which are OK. If there was any doubt the same unit moves to 15370 around 1400, it`s now removed:

15365-15375 at least, March 6 at 1357, huge dirty noise blob as this RHC transmitter is totally out of order; they just moved it up from 9850 without noticing the problem! By 1435 recheck it`s back in whack (Glenn Hauser, OK, DX LISTENING DIGEST) 

** EGYPT. 12035, March 5 at 2321, open carrier, dead air from R. Cairo. Nice clean signal, no hum or traces of distorted modulation; congratulations! O, really just warming up, Abis at 2330-0045 Arabic, 0045-0200 Spanish (Glenn Hauser, OK, DX LISTENING DIGEST)

** GUATEMALA. 4055, March 6 at 0609, R. Verdad in national anthem by children`s choir. Much like the Mexican, it goes on and on with repeating multiverses (but different lyrix?), too much distortion to understand anything. Cadence slows down for finale, ending at 0613.5 and carrier on a while longer (Glenn Hauser, OK, DX LISTENING DIGEST) 

** PERU [and non]. 5980-, March 6 at 0059, two JBA carriers beating against each other with BFO, at least one slightly on the lo side compared to MW 980 signals. One of them, R. Chaski, goes away about 0104:17.5* which is 37 seconds later than last check a sextanight ago, i.e. averaging 6+ seconds per; margin of error as I could not get a precise timing on the cutoff under these difficult circumstances. At least no Cuban pulse jamming against nothing this time. Remaining carrier no doubt is BBC via UAE. 

What will the situation be in A-15? Of course, Perú is too out of it to participate in HFCC; BBC will be gone from 5980, but ``YFR`` will be back on 5985 from 0100. Maybe with Jeff White now heading HFCC, he can get the YFR abbr. retired and replaced by RMI? Or OKE? RMI is on the roster for the defunct Hialeah Gardens original site (Glenn Hauser, OK, DX LISTENING DIGEST)

** SPAIN. 9620, March 5 at 2317, REE is still on air instead of closing at 2300, political news, not even a silly ballgame! Very good here // poor-fair 11940, not heard on presumed unpropagating 17755, nor on 15490 until at 2325 I find that // JBA. Finally at 2330, into sign-off routine ``until 1900`` cluelessly announcing out of date frequencies! ``11685, 11940, 9620, 12030``, plus irrelevant satellite frequencies and polarizations --- don`t you have to give all the satellite transmission parameters for them to be of any use? Forward error correction gets a bit too technical? And how do you express that in Castilian? (Glenn Hauser, OK, DX LISTENING DIGEST)

** U S A. 9395, March 5 at 2320, WRMI with TruNews here and not on 11550, which used to run 18-24 UT, and same transmitter from 01 is not heard on 5015 either, so 24h on 9395 appears to replace them both, and then some. Checked at 1713 UT March 6, the WRMI grid has been updated as of March 8, showing no use at all of transmitters 1, 3 and 5, and some others swapped around.
(Glenn Hauser, OK, DX LISTENING DIGEST)

** U S A. WORLD OF RADIO 1763 monitoring: Not to be heard any more on Global 24, UT Friday at 0001 on 9395 --- however, G24 on Facebook says WOR was the second most popular program on their schedule, after `The Rock Pile`, and they are planning a comeback; while financial contributors are upset about the lack of glasnost. Anyhow, WOR remains:

Fri 2130 on WRMI 7570 & 15770
Sat 0730 & 1530 on Hamburger Lokalradio 7265-CUSB
Sat 1000 on WRMI 5850
Sat 2030v on WA0RCR 1860-AM Gateway 160 Meter Radio Newsletter, MO 
Sun 0415v on WA0RCR 1860-AM Gateway 160 Meter Radio Newsletter, MO
Sun 2300 on WRMI 11580

[USA DST shifts now in effect!:]
Mon 0300v on Area 51 via WBCQ 5110v
Tue 1100 on WRMI 9955
Wed 0730 & 1530 on Hamburger Lokalradio 7265-CUSB
Wed 1315 on WRMI 9955
Wed 2100 on WBCQ 7490v

As chances to hear WOR on SW are reduced, I suggest you may want to subscribe to a podcast: three different sources are linked atop 
(Glenn Hauser, OK, DX LISTENING DIGEST)

** U S A. 700, March 6 at 0602 UT, Spanish religion easily audible with WLW nulled, i.e. KHSE Wylie/The Metroplex whose major daylobe is aimed right at Cincinnati! Also may be day power 1500 instead of 920 watts night; KAZ was getting it near Chicago. I have it here easily on daytime groundwave (Glenn Hauser, OK, DX LISTENING DIGEST)

** U S A. Checked 24 hours later around 0700 March 5, 50 kW daytimer WAMB is no longer colliding with WOAI, altho with WOAI nulled I hear some weak signal. Regarding the confusing situation about WAMB 1200 Nashville and its FM relays, I asked Doug Smith, TN, to sort it out:

``98.7 ----
Currently occupied by WCRT-FM1. It's licensed as a booster*, under
Special Temporary Authority to address Cuban interference to WCRT-1160. Latter station *was* WAMB but switched calls (and format to religion) when sold to Bott Broadcasting a few years back. The booster switched with it.

Permit for new translator W254CK. Which is currently authorized to use
one of the WAMB-1200 towers northwest of Nashville. There are four on
the site, even though WAMB is non-directional. The site was built for
WWGM-1560, which *was* directional. WWGM moved to Gallatin years ago,
becoming non-directional WMRO.

98.9 ---
WANT, Lebanon. Co-owned with WAMB-1200 and WCOR-1490, Lebanon (and
WKDA-900 Lebanon). WAMB IDs with WCOR & WANT. Yes, the format is Real
Country.

99.3 ---
does do surprisingly well for 3 watts. Not sure why.

106.3 ---
will apparently be the new home of WCRT-FM1 once W254CK bumps it`` (Glenn Hauser, DX LISTENING DIGEST)

This report dispatched at 1726 UT March 6

Changes of WRMI Okeechobee, updated

Test transmissions of Radio Taiwan International on March 5-7
0200-0300 on 11920 YFR 100 kW / 160 deg to SoAm Spanish tx#02
Global 24 Radio, cancelled from March 3
0000-2400 on  9395 YFR 100 kW / 355 deg to ENAm English tx#06
Tru News, cancelled from March 3
0100-0700 on  5015 YFR 100 kW / 160 deg to CeAm English tx#03
1800-2400 on 11550 YFR 100 kW / 044 deg to WeEu English tx#01
Tru News and Radio Paradise from March 3
0000-2400 on  9395 YFR 100 kW / 355 deg to ENAm English tx#06
Radio Slovakia International from March 8
0000-0030 on  5850 YFR 100 kW / 355 deg to ENAm Slovak  tx#12, ex tx#08
0030-0100 on  5850 YFR 100 kW / 355 deg to ENAm English tx#12, ex tx#08
Tru News from March 8
0100-0700 on  5850 YFR 100 kW / 355 deg to ENAm English tx#12, ex tx#08
WRMI programs from March 8
1000-1030 on  5850 YFR 100 kW / 355 deg to ENAm Various tx#12, ex tx#08
1000-1400 on  9955 YFR 100 kW / 160 deg to CeAm Various tx#10, ex 1100-1500
2100-2200 on  9955 YFR 100 kW / 160 deg to CeAm Various tx#10 Sa/Su, ex 2200-2300
2200-2300 on  9955 YFR 100 kW / 160 deg to CeAm Various tx#10 We-Su, ex 2300-2400
2300-0500 on  9955 YFR 100 kW / 160 deg to CeAm Various tx#10, ex 0000-0600
Brother Stair from March 8
0500-1000 on  9955 YFR 100 kW / 160 deg to CeAm English tx#10, ex 0600-1100
0700-1000 on  5850 YFR 100 kW / 355 deg to ENAm English tx#12, ex tx#08
1000-2100 on 11825 YFR 100 kW / 315 deg to WNAm English tx#08, ex tx#12
1400-2100 on  9955 YFR 100 kW / 160 deg to CeAm English tx#10, additional
2100-2200 on  9955 YFR 100 kW / 160 deg to CeAm English tx#10 Mo-Fr, ex 2200-2300
2200-2300 on  9955 YFR 100 kW / 160 deg to CeAm English tx#10 Mo/Tu, ex 2300-2400

--
73!
Ivo Ivanov

QTH: Sofia, Bulgaria
Equipment: Sony ICF-2001D 30 m. long wire

Global 24 hopes to return on air....

First, thank you to the many of you that financially supported us. We are hoping to make a comeback in a new, streamlined form later in March. We understand that, in some cases, we didn’t keep our promises on the newsletters and the like. It should go with out saying, we’re very sorry if we’ve let you down. If you’re looking for a refund of any sponsorship money given to Global 24 and would rather "pull out" than wait and see what happens.  Let us know in an email to qsls@global24radio.com and we can begin to explore what, if anything, that might look like. Of course, we’d rather count on your support as we try and put this back together – but either way – we understand. (Global 24)

Addio ai 1440 khz....

Come preannunciato da Studio DX e Bclnews, alla fine dell'anno il sito trasmittente di Marnach sarà chiuso e smantellato, e il terreno acquisito dal Governo a prezzo di mercato. L'operazione mette termine anche ad un contenzioso con le popolazioni della zona a causa delle emissioni elettromagnetiche del trasmettitore operante su 1440 khz


ANTENNA IN FERRITE PER ONDE MEDIE

di Giovanni Lorenzi IT9TZZ

Questa antenna è stata concepita per essere usata, specialmente, con i ricevitori con antenna in ferrite incorporata, quelli classici per ascolti estemporanei. La costruzione è molto semplice e segue lo schema elettrico della figura nel quale l’avvolgimento L è composto da 35 spire di filo di rame per circuiti telefonici avvolto su un nucleo composto da quattro ferriti unite assieme. Vanno bene anche degli spezzoni di ferrite recuperate da radioline per le onde medie. Gli estremi dell’avvolgimento andranno connessi ai capi di un condensatore variabile recuperato da una radiolina per onde medie e avendo cura di collegare assieme le sezioni onde ottenere una capacità totale di circa 300 pF. Per mezzo di un piccolo interruttore si potrà inserire, quando sarà necessario, un condensatore ceramico addizionale di valore fisso da 330 pF che servirà a “ coprire “ la parte bassa delle onde. Accertatevi, in fase di collaudo, che i valori dei condensatori permettano la copertura globale della gamma.
Per unire le ferriti ho impiegato delle fascette stringi cavo che, tra l’altro, sono servite anche a fissare gli avvolgimenti e tutta l’antenna al rotore, composto da una pezzo di compensato da 1 cm di spessore. Il montante invece è formato di legno di abete. Per fissare al compensato i componenti ho utilizzato delle puntine da disegno di ottone alle quali ho tolto la parte di plastica.  



L’antenna si riduce in due pezzi di dimensioni ridotte e facilmente trasportabili. Il rotore è libero di girare solidale ad un bullone permettendo di direzionare le ferriti a piacimento. La distanza del rotore dalla base dipende dall’altezza del ricevitore e a tale proposito raccomando di ridurla al minimo per agevolare il trasferimento, per induzione, del segnale captato dall’antenna. Il lettore, certamente attento, avrà notato, che in questa antenna manca il classico avvolgimento secondario ( link ) di trasferimento del segnale.

  
   Per l’impiego agire come segue. Disporre il ricevitore sulla base, sotto il rotore e sintonizzarlo su una frequenza sulla quale operi una stazione di debole potenza. Ruotare il cursore del condensatore variabile fino ad osservare un aumento sensibile del rendimento dell’apparecchio, segno che l’antenna ha catturato e trasferito alla ferrite del ricevitore il segnale ricevuto. Direzionare le ferriti per ottimizzare l’ascolto. Eventualmente inserire il condensatore addizionale per sintonizzare le stazioni che operano nella parte bassa delle onde medie.
Come per l’antenna presentata su uno degli scorsi numeri ho notato il fenomeno della discriminazione che essa opera quando, sintonizzando due stazioni operanti sullo stesso canale e provenienti da direzioni diverse, si riesce ad ascoltare, al meglio, ora una ora l’altra operando una lieve desintonizzazione. In tal modo si riceve in modo ottimale una delle due emittenti e ciò permette di recepire un numero di dettagli maggiori in caso di invio di rapporto di ricezione.
Con questa antenna, davvero fenomenale, ho potuto ascoltare dalla Sicilia: Radio Studio X operante da Momigno ( PT ), Sunrise Radio da Londra ( 750 W!!! ), Radio Vacanza dalla Romania, Radio Euskadi dalla Spagna, Cosmo Radio dalla Grecia e tante altre realizzando delle registrazioni degli annunci che sono state pubblicate sul sito www.bclnews.it gestito da Roberto Scaglione. Il ricevitore usato era un Panasonic RF-B65 a sintonia digitale.
Vi auguro buona costruzione e vi invito a farmi conoscere le vostre esperienze in merito all’impiego di quest’antenna che non finirà di stupirvi per l’eccezionale rendimento.


Per eventuali chiarimenti indirizzare a: tzzlorenzi @ tiscali.it. Buon divertimento.



FILTRO AUDIO ATTIVO DI BF

di Giovanni Lorenzi

 Durante l'estate del 2004 ho collaudato con successo l’antenna loop il cui progetto è apparso sulle pagine di BCLNews nei mesi da giugno ad agosto. Tutto questo è avvenuto nel mio QTH delle vacanze e per motivi di ordine logistico mi sono dotato, a suo tempo, di un ricevitore portatile, per la precisione un Panasonic RF-B65, davvero molto compatto, a sintonia digitale, con 36 memorie disponibili, molto sensibile ma, ahimè, poco selettivo. Ho cercato di ovviare a questo handicap costruendo un filtro di bassa frequenza sia per l'AM che per la SSB e il CW. Sono partito da uno schema classico nel quale i componenti che entrano in gioco nella definizione del limite superiore o inferiore delle frequenze da eliminare sono: C1, C5, C6, R4, R5 ed R6. Nella scelta dei valori di questi componenti occorre prestare molta attenzione affinché il valore misurato non si discosti oltre l’1 % di quello indicato nella lista. Un problema che potreste incontrare è il reperimento della resistenza R9 da 10 MW in luogo della quale potrete usare 10 da 1 MW oppure 5 da 2 MW collegate in serie. Solitamente, nella costruzione dei filtri di bassa frequenza si impiegano circuiti passivi e dal modo in cui i componenti vengono configurati si possono ottenere diverse opzioni; inoltre, con certi valori dei componenti, calcolabili mediante apposite formule, e stabiliti i valori delle frequenze di taglio o della banda passante, si ottengono filtri che hanno curve dai fianchi più o meno ripidi. Per le mie esigenze ho scelto un filtro passa banda dalla frequenza di taglio di 800 Hz (con banda passante 300 ¸ 3500 Hz nella posizione 3) e con la possibilità di modificarla leggermente a scelta tra due valori: 25 Hz in posizione 1 e 80 Hz in posizione 2. Il filtro andrà collegato (input), tramite cavetto coassiale, all’uscita audio dell’apparecchio; l’output, invece, deve essere collegata ad un buon altoparlante o ad una cuffia. L'uso del filtro è semplice: effettuati i collegamenti e sintonizzata una stazione in qualsiasi modo, selezionare S2 fino ad ottenere la risposta audio più congeniale. Il circuito si alimenta con una batteria da 9 V in linea con la portabilità del sistema antenna-ricevitore evitando il solito alimentatore. Il circuito stampato è opportuno: allegato troverete il modello e il layout dei componenti. Prestate attenzione all’esatta inserzione dell’integrato (un puntino indica il piedino 1) e all’esatta polarità dei condensatori elettrolitici. Per il resto non dovete fare altro che divertirvi. Il limite del sistema è uno solo: il fatto che il segnale di bassa frequenza passi attraverso un filtro rappresenta un vantaggio in quanto vengono ad essere eliminate le frequenze indesiderate ma, allo stesso tempo, si ottiene una caduta di rendimento della qualità dell’audio. A questo “difetto“ si potrebbe ovviare inserendo, all’uscita del filtro, un robusto amplificatore di bassa frequenza, magari dotato di regolazione dei toni. Per eventuali contatti: tzzlorenzi @ tiscali.it

G.Lorenzi - IT9TZZ
Elenco dei componenti


R1= 56 kW
R2 = 47 kW
R3 = 47 kW
R4 = 220 kW
R5 = 220 kW
R6 = 100 kW
R7 = 100 kW
R8 = 2,2 MW
R9 = 10 MW

C1 = 1 nF Poliestere
C2 = 1  mF Elettrolitico
C3 = 4,7  mF Elettrolitico
C4 = 2,2  mF Elettrolitico
C5 = 1 nF Poliestere
C6 = 2,2 nF Poliestere
IC1 = mA741 con zoccolo 4+4
S1 = Interruttore miniatura
S2 = Commutatore 1 via 3 posizioni







ANTENNA BEVERAGE ("BEATI VOI")

di Giovanni Lorenzi IT9TZZ
Il provocatorio titolo che ho dato a questo articolo riassume lo stato d’animo della maggior parte dei BCL e dei radioamatori, oppressi dalla mancanza di spazio sufficiente a sviluppare le idee, in fatto di antenne, che frullano per la testa. Quindi, beati voi se avete la possibilità di costruire l’antenna che vado a descrivere.
L’antenna Beverage prende il nome dal suo inventore Harold H. Beverage  che la brevettò nel 1921 con  Pat. USA 1,381,089.
L’antenna Beverage richiede l’installazione su un terreno pianeggiante, non importa se alberato, e naturalmente molto spazio. Perché essa sia efficace, è indispensabile che sia lunga non meno di 1,25 * λ laddove λ rappresenta la lunghezza d’onda del valore di centro gamma della frequenza sulla quale si intende farla operare. Nella tabella allegata sono riportati i valori di lunghezza dell’antenna per le bande broadcasting e radioamatoriali. Come si potrà dedurre, per costruire una Beverage operante in 160 m occorrono circa 200 metri di filo. Man mano che la frequenza sale, diminuiscono le dimensioni; tuttavia, anche nella banda dei 10 m, destinata al servizio d’amatore, la lunghezza appare proibitiva alla maggior parte dei radioppassionati.


I pregi di quest’antenna sono: la spiccata direttività  (Fig. 3) se essa viene terminata con una resistenza di valore equivalente all’impedenza caratteristica (≈ 500 Ω), un rapporto avanti/indietro di almeno 30 dB ed un buon rendimento segnale/rumore. Un difetto annoverabile è lo scarso guadagno rispetto ad un’antenna dipolo o verticale classica. Per tale motivo la Beverage è poco indicata in trasmissione mentre è ottima in ricezione in quanto la spiccata sensibilità dei ricevitori compensa lo scarso guadagno.


L’uso della Beverage è più comune nelle bande basse. Il suo costo è ridotto al minimo. Realizzata un’antenna Beverage sui 160 m essa avrà un rendimento, cioè una spiccata direttività man mano che aumenta il rapporto tra la sua lunghezza e la lunghezza d’onda del segnale da ricevere.

La costruzione è facile (Fig 2): occorre una trecciola di rame (3) di 1,5 mm o 2 mm posta a circa 2 m dal terreno, opportunamente isolata con isolatori di porcellana, il tutto posto su sostegni (4) che potrebbero essere anche alberi. All’inizio e alla fine dell’antenna bisogna predisporre due scatole metalliche (2) per il collegamento alla terra, per proteggere la resistenza di terminazione che è formata da 6 resistenze da 4700 Ω in parallelo e per contenere l’eventuale balun di adattamento.


Considerato che la stragrande maggioranza dei ricevitori moderni presenta, tra l’altro, anche una presa di antenna ad alta impedenza, non occorre realizzare un trasformatore d’impedenza tra il ricevitore e l’antenna. Se invece si usa il ricevitore del transceiver (1), occorrerà dotarsi del trasformatore di adattamento (BALUN) con rapporto 9:1, costituito da un toroide FT-50-77 sul quale si avvolgeranno 6 spire con filo smaltato da 0,35 mm di diametro per il primario (lato Beverage) e 2 spire dello stesso filo verso il TRX.

  
 Alle due estremità dell’antenna occorre realizzare una rete (5) con 4 radiali di filo da 5 mm di diametro lunghi 5 m ed infissi nel terreno per circa 15 cm (Fig. 2).
L’antenna Beverage sarebbe bidirezionale ma con la resistenza di terminazione acquista una spiccata direzionalità (vedi diagramma in figura 3). Va da se che occorre disporla nella direzione preferita. L’antenna riceverà esclusivamente i segnali provenienti da quella direzione, senza interferenze e rumori quando con le altre antenne convenzionali non si ascolterebbe niente.
Insomma una grande antenna (in tutti i sensi).
G. Lorenzi
λ ( m )
RANGE FREQUENZA
CENTRO GAMMA kHz
LUNGHEZZA (1,25 * λ ) m
IMPIEGHI BANDA
160
1.830 - 1.850
1.840
203,80
RADIOAMATORIALE
120
2.300 - 2.495
2.397
156,45
BROADCASTING
90
3.200 - 3.400
3.300
113,64
BROADCASTING
80
3.500 - 3.800
3.650
102,74
RADIOAMATORIALE
75
3.900 - 4.000
3.950
94,94
BROADCASTING
60
4.750 - 5.060
4.905
76,45
BROADCASTING
49
5.900 - 6.200
6.000
62,50
BROADCASTING
40
7.000 - 7.100
7.050
53,19
RADIOAMATORIALE
41
7.100 - 7.350
7.225
51,90
BROADCASTING
31
9.400 - 9.990
9.695
38,68
BROADCASTING
30
10.100 - 10.150
10.125
37,04
RADIOAMATORIALE
25
11.600 - 12.100
11.850
31,65
BROADCASTING
21
13.500 - 13.870
13.685
27,40
BROADCASTING
20
14.000 - 14.350
14.175
26,46
RADIOAMATORIALE
19
15.100 - 15.800
15.450
24,27
BROADCASTING
16
17.480 - 17.900
17.690
21,20
BROADCASTING
15
18.900 - 19.020
19.020
19,72
BROADCASTING
15
21.000-21450
21.225
17,67
RADIOAMATORIALE
13
21.450-21.750
21.600
17,36
BROADCASTING
12
25.600 - 26.100
25.850
14,51
BROADCASTING
11
26.100 - 27.500
26.800
13,99
CITIZEN BAND
10
28.000 - 29.700
28850
13,00
RADIOAMATORIALE

Agenda DX 06/03

ANNIVERSARIO EMITTENTE
Portenas 6-40, Venezuela 640 Khz (1950)

Jeff White new chairman of the HFCC

Jeff and Thais White are seen here with Salim Al Nomani of the Public Authority for Radio and Television in Oman, where the High Frequency Coordination Conference (HFCC) took place Feb 1-5. At this meeting, Jeff was elected the new chairman of the HFCC, taking over from Oldrich Cip (ex chief engineer of Radio Prague), who had been the HFCC chairman since its formation in 1990. On the program Wavescan beginning March 1 there will be the first of several reports from the recent High Frequency Coordination Conference in Oman. WRMI's Jeff White and WWCR's Jerry Plummer will discuss the shortwave broadcasting conference, and in upcoming reports on Wavescan during the coming weeks they will talk with Oldrich Cip, outgoing HFCC Chairman and Salim Al Nomani of the Public Radio and TV Authority of Oman. A further report will examine what can be heard on the radio bands in Salalah, southern Oman. (WRMI Facebook via DXLD)